Bambu Lab P2S 3D Printer

Original price was: 750.00$.Current price is: 510.00$.

Speed

Fast Printing

Camera

Brighter Camera

Colors

Easy Multi-Color Printing

Buy Now

P2S Features:
– 5-Inch Touch Screen
– AI Failure Detection
– Auto Flow Dynamics Calibration
– Multi-Color Printing
– Cold-Air Cooling
– Active Venting Filament Drying
– 256*256*256 mm³ Print Volume

P2S 3D Printer Features

BODY
Build Volume (W×D×H)		256 × 256 × 256 mm³
Chassis		Plastic and Steel
Outer Frame		Plastic and Glass
PHYSICAL DIMENSIONS
Physical Dimensions		392 × 406 × 478 mm³
Net Weight		14.9 kg
TOOLHEAD
Extruder Gear		Hardened Steel
Nozzle		Hardened Steel
Max Nozzle Temperature		300 °C
Included Nozzle Diameter		0.4 mm
Supported Nozzle Diameter		0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter		Built-in
Filament Diameter		1.75 mm
Extruder Motor		Bambu Lab High-precision Permanent Magnet Synchronous Motor
HEATBED
Build Plate Material		Flexible Steel Plate
Included Build Plate Type		Textured PEI Plate
Supported Build Plate Type		Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack
Max Heatbed Temperature		110 °C
SPEED
Max Speed of Toolhead		600 mm/s
Max Acceleration of Toolhead		20,000 mm/s²
Max Flow for Hotend		40 mm³/s (Test parameters: 250 mm round model, Bambu Lab ABS, 280 °C)
FILTRATION
Activated Carbon Filter Type		Granulated Coconut Shell
VOC Filtration		Supported
Particulate Matter Filtration		Supported
COOLING
Part Cooling Fan		Closed Loop Control
Cooling Fan for Hotend		Closed Loop Control
Auxiliary Part Cooling Fan		Closed Loop Control
FILAMENT SUPPORTED
PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
SENSORS
Camera		Built-in; 1920 × 1080; 30 fps HD
Door Sensor		Supported
Filament Run Out Sensor		Supported
Filament Tangle Sensor		Supported
Filament Odometry		Supported with AMS
Power Loss Recovery		Supported
ELECTRICAL REQUIREMENTS
Voltage		100–120 VAC / 200–240 VAC, 50/60 Hz
Max Power*		1200 W @ 220 V / 1000 W @ 110 V
PLA Steady-State Power		200 W @ 220 V / 200 W @ 110 V (PLA printing)
Working Temperature		10 °C – 30 °C
ELECTRONICS
Touchscreen		5-inch 854 × 480 Touchscreen
Storage		Built-in 8 GB EMMC and USB Port
Control Interface		Touchscreen, Mobile App, PC App
Motion Controller		Dual-core Cortex-M4 and Single-core Cortex-M7
Application Processor		Quad-core 1.5 GHz ARM A7
Neural Processing Unit		2 TOPS
SOFTWARE
Slicer		Bambu Studio Supports third-party slicers that export standard G-code (Super Slicer, PrusaSlicer, Cura), but some advanced features may not be supported.
Supported Operating System		MacOS, Windows, Linux
NETWORK
Ethernet		Not Available
Wireless Network		Dual-Band Wi-Fi
Network Kill Switch		Not Available
Removable Network Module		Not Available
802.1X Network Access Control		Not Available
WI-FI
Operating Frequency		2412 – 2472 MHz, 5150 – 5850 MHz (FCC/CE) 2400 – 2483.5 MHz, 5150 – 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP)		2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC) 5 GHz Band3: <30 dBm (CE); <24 dBm (FCC) 5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol		IEEE 802.11 a/b/g/n